Description
Description
Are you looking for a compact size flight controller to go into your fixed wing? Much like its big brother the F405-Wing Flight Controller The F411 Fixed Wing Flight Controller is the perfect solution for your needs. Fully iNav capable and ready for FPV, take your fixed wing to the next level!
Matek F411 Wing Flight Controller– STM32F411, MPU6000, INAVOSD, BMP280, 2x UARTs, 1x Softserial, 1x I2C, 2x Motors & 5x Servos, 2x BEC & current sensor on board.
FC Specifications
- MCU: 100MHz STM32F411
- IMU: MPU6000 accelerometer/gyro (SPI)
- Baro: BMP280 (I2C)
- OSD: INAV OSD w/ AT7456E chip
- Blackbox: No
- VCP & 2x UARTs
- 2x Motors, 5x Servos outputs
- 1x I2C
- 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
- Built in inverter for SBUS input (UART1-RX)
- SoftSerial_Tx1: ST1 pad by default
- PPM: ST1 pad with softserial disabled
- Battery Voltage Sensor: 1:10 (Scale 1100)
- WS2812 Led Strip : Yes
- Beeper : Yes
- RSSI: No
FC Firmware
- INAV Flight
- Target: MATEKF411
PDB
- Input voltage range: 6.5~30V (2~6S LiPo) w/TVS protection
- 2x ESC power pads
- Current Senor: 78A, 3.3V ADC, Scale 423
BEC 5V output
- Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
- Continuous current: 2 Amps
BEC Vx output
- Designed for Servos
- Voltage adjustable, 5V Default, 6V via jumper
- Continuous current: 3 Amps
BEC 3.3V output
- Designed for Baro / Compass module/ OLED and Spektrum RX
- Linear Regulator
- Continuous current: 200mA
Physical
- Mounting: 24 x 24mm, Φ2mm
- Dimensions: 41 x 28 x 10mm
- Weight: 7g (Total 12g w/ bottom plate and M2 standoffs)
Links
- Matek Wiring Guide
- Matek Downloads
| Name | Value |
|---|---|
| MANUFACTURER | Matek Systems |
| MOUNTING SIZE | Custom, 24×24 |
Reviews
There are no reviews yet.