1412-6400KV 4-Pole Sensored Brushless Motor

Description

The 1412-6400kv motor is a very high torque, high wattage, mid-RPM motor designed for 2s no prep Street Eliminator racing.

Castle Electronics went with a slightly different approach than current motors on the market. Most no prep motors are standard 540 size with very high kv (low turn). These motors rely on high RPM and low torque to push the car down the track (think turbo charged 4 cylinder). The 1412 is longer than most drag motors, which provides significantly more torque, acceleration, and cooler temps (think American Muscle) but still in a 540 diameter motor so it fits most vehicles . This results in a high horsepower, snappy, cool running motor. Your final drive ratio will need to be decreased (larger pinion/smaller spur) to get the RPMs up for top speed due to the size of the motor it will take just about any gearing and CHEAT timing you can throw at it.

Castle Electronics beefed up the design over a standard 14xx series motor to handle the high demands of drag racing. It uses a 5mm output shaft, 12AWG wires and 6.5mm bullets. Due to the high power nature of this motor it is highly recommended to use a 1/8th scale size ESC or larger. The 1/8th Mamba Monster X and 1/6th scale Mamba Monster X 8s are great pairings with this motor.

WARNING: Drag run setups are inherently abusive and extremely hard on all electronic components. Every component in the configuration can be strained, weakened (or worse) without using extreme caution, observance of electric theory and advanced knowledge of all aspects of the RC hobby. Drag racing are the most advanced, aggressive and volatile applications in the RC car hobby. Improper setup or use of this product can result in catastrophic failures of the motor, ESC and/or batteries.

Ideal for 2s No Prep Street Eliminator vehicles on 2s such as Associated DR10, Losi 22S, and Traxxas Drag Slash

Tech Specs:

• Input Voltage Range: 2S LiPo
• Kv: 6400
• Max. RPM: 75,000
• Size: Length: 62.5mm
• Diameter: 36mm
• Weight (w/wires): 283g (9.98oz)
• Shaft Size: Length: 21mm
• Diameter: 0.197″ (5mm)
• Mounting Hole Specifications: M3 @ 25mm
• Cooling Fan: Optional, coming soon!
• Connectors: 6.5mm male Castle Bullet Connectors
• Items Needed for Operation: Compatible Electronic Speed Control (ESC)
• Application Guidelines: For 2WD Street Eliminator on 2s
• Recommended ESC(s): Mamba Monster X, Mamba Monster X 8s

Used with permission, copyright &copy2023 Castle Creations. Copyright &copy2023 Brey Corp. t/a Hobby Works&reg