Description
The Tekin Gen4 Eliminator Drag Racing Modified Brushless Motor is a purpose built Drag Racing motor, engineered for performance. Utilizing Oversized Ultra Torque rotors and the best materials available, Tekin designed the Eliminator to cut weight while reducing resistance, resulting in a purebred Drag Racing machine. From Pro Mod to Street Eliminator classes, the Eliminator motors create huge power across all RPMs whenever you need it. The GEN4 Eliminator is competition performance with the speed and power you need to gap the competition.
The stator is precision stamped and pressed, increasing efficiency and reducing resistance. Every Eliminator motor is hand-wound with high purity copper wire and machined from 6061-T6 aluminum. Completely tunable with optional rotors and fully re-buildable, the GEN4 Eliminator motor is a premium performance power plant for the serious drag racer.
Specifications:
Input Voltage: 1-2S LiPO
Weight: 5.1oz / 145g
Shaft Dimensions: 3.18mm (1/8″) x 15.3mm
Motor Diameter: 35.85mm / 1.40″
Motor Length: 50.25mm / 1.978″
Max Operating Temperature: 180°F / 82°C
Bearing Dimensions: Front: 4x13x5mm; Rear: 1/8×3/8×5/32″
Rotor Size: ULTRA TORQUE YELLOW
Rebuildable: Yes WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Details…
This product was added to our catalog on December 6, 2021
Mitchell Trotter Jr. Verified Owner Friday, Jan 26 2024 (about a year ago) Tekin Gen4 Eliminator Drag Racing Modified Brushless Motor (2.0T) Ok, I was way to hard on Amain and Tekin for the motor issues and had to change my review, all electronics have issues sometimes. I got the new motor from Tekin and just took my time and adjusted the sensors to get the A,B,C poles extremely close, timing great now, this motor pulls some amperage, around 21.6 at 23 degrees of timing and a screaming 85000 rpm. Finally ran this motor the past weekend and even though I had to put some work in and luckily I have the equipment and ability, but that is part of tuning. Would purchase again because the motor just screams and does not stop. Thanks again Amain and Tekin.
Side note, Tekin, I hope that you guys step up the QC, the average person is not able to fix the sensors and what not to have a great motor. And how about some stainless or brass shims and not them garbage teflon ones, lol. View all reviews
Reviews
There are no reviews yet.