Description
Tamiya Suzuki Jimny JB23 1/10 4WD Electric Rally Car Kit. This model faithfully recreates the the legendary Japanese off-roader. The JB23 depicted by this model is one of the 3rd generation Jimnys introduced in 1998 which had a modernized, rounded body design. The Jimny body sits atop Tamiya’s proven shaft-driven 4WD MF-01X chassis, which is at home on a range of surfaces from road to flat dirt.
NOTE:Finished kit shown in photos is for illustrative purposes only. This is a kit that requires assembly. See needed to complete list below for a list of items required to complete the model.
Features:
- 1/10 scale R/C model assembly kit
- Body is made of polycarbonate
- The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension
- Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front
- The chassis can be assembled into S and L wheelbases using separately sold propeller shafts
- A host of Hop-Up Option parts are available to tune the MF-01X chassis
- Includes a Hobbywing THW-1060 Brushed ESC
Specifications:Adjustable Gear Ratio:YesBearings:Plastic bushingBody Material:PolycarbonateBody Stickers:IncludedChassis Material:ABS PlasticChassis Type:MX-01Construction Type:Assembly KitDifferential Type:GearDrive Type:4WDMotor:Brushed 540 TypeScale: 1/10Shock Damper:Friction typeSuspension:Fully Independent Double WishboneTerrain Use:Multi-Purpose
Needed To Complete:
- 2-Channel Radio and Receiver
- Battery Pack
- Charger
- Paint
- AA Batteries
- Tools
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Details…
This product was added to our catalog on February 21, 2023
Robert Popham Verified Owner Sunday, May 4 2025 (6 months ago) Tamiya Suzuki Jimny JB23 1/10 4WD Electric Rally Car Kit (MF-01X) Like all Tamiya kits it went together quite well. I used shock kit TAM54753 @ $22.40 with the car springs and it worked great. Friction springs are only good for hard surfaces and I have sand and gravel out here. Goes about 10-12MPH and is more stable than I thought it would be. The body in the front where it bends under is quite thin and started to crack when cutting. I used 2 layers of 3/8″ wide black auto pen-strip on the outside and heat shrank it to the body. Can’t see it and was very strong. A very good looking kit!
It’s too bad AMain doesn’t have picture posts View all reviews
Reviews
There are no reviews yet.