RMRC M9N Nano GPS for Drone and UAV

Description

The next generation of GPS receiver in a tiny (some might say micro, some might say nano) package, exclusively from RMRC!

Easy Wiring

Designed to work with pretty much any drone flight control system you can think of including INAV, Betaflight, Ardupilot, Pixhawk, CubePilot, and many more. Includes a solder-on cable with single-pin connectors that will plug right in to many Matek boards and other brands as well! 

All the GPS

Includes the major GPS protocols including GPS, GLONASS, BDS, GALILEO. The M9140-KB chip includes 92 channels, augmented by SBAS and QZSS.

This Thing is Tiny!

Ultra compact and lightweight form factor, there’s no giant plastic case or heavy cable to mess with. Perfect for keeping your builds super light. Simple 16.3×12.4×4.2mm main GPS unit weighing only 2.6g. The light weight wiring harnesses make this much easier to integrate into your aircraft without causing a ton of drag or weighing your aircraft down.

What’s Included

• 1 M9N GPS Nano Receiver
• 1 Wire harness with single pin connectors for easy connection to Matek and other flight controllers, 150mm
• 1 double sided adhesive foam pad
• 1 clear heat shrink

Specifications Summary

• Primary Chip: M9140-KB
• Operating Voltage: 3.6-5.5V DC, Typical 5V DC
• Operating Current: 25mA@5V
• Receiver type: GPS L1 C/A, QZSS L1 C/A/S, GLONASS L10F, BDS B1I, Galileo E1B/C, SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN
• Default Position System: GPS, GLONASS, BDS, GALILEO
• Augmentation System: SBAS, QZSS
• Channels: 92 Channel
• Accuracy
  • Horizontal Position: 1.5m CEP
  • Velocity: 0.05m/s
  • Dynamic heading: 0.3 deg
• Data Output
  • Baud rate: 4800bps – 921600bps, Default 38400bps
  • Level: TTL Level
  • Protocol: NMEA, UBX
  • NMEA Messages: RMC, VTG, GGA, GSA, GSV, GLL
  • Update Rate: 0.25Hz-25Hz, Default 1Hz