HobbyWing FPV Stack 65A 4in1 ESC + FC F7 Convertible

Description

The HobbyWing FPV Stack 65A 4-in-1 ESC + FC F7 Convertible is a high-performance solution designed for FPV racing enthusiasts seeking reliability and advanced features. This stack combines the XRotor Micro 65A 4-in-1 ESC with the F7 Convertible Flight Controller, offering seamless integration and top-tier performance.

Key Features:

• XRotor Micro 65A 4-in-1 ESC:

  • Equipped with a 32-bit microprocessor running at 120MHz, ensuring exceptional performance.
  • Supports third-generation BLHeli_32 firmware with up to 128KHz PWM output frequency, enhancing motor compatibility.
  • Features damped light mode for regenerative braking and active freewheeling, providing rapid motor deceleration.
  • Includes sync loss prevention with adjustable parameters for optimal performance in demanding conditions.
  • Compatible with various input signals, including regular 1-2ms pulse width, Oneshot125, Oneshot42, Multishot, and Dshot signaling up to Dshot1200.
  • Offers a beacon functionality to assist in locating lost aircraft by emitting beeps after a period of zero throttle.

• F7 Convertible Flight Controller:

  • Powered by the STM32 F722 MCU, allowing high-frequency PID looptime and gyro operations.
  • Onboard OSD microchip with DMA mode support enables parameter adjustments via Betaflight software.
  • Compatible with Betaflight firmware for comprehensive parameter tuning, ideal for FPV racing.
  • Integrated Flash memory chip records flight data, facilitating easy aircraft setup adjustments.
  • Supports various receivers, including SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, among others.
  • LED strip signal output port allows customization of LED colors and flash modes through the flight controller.
  • Voltage and current monitoring ports enable real-time battery status checks.
  • Buzzer output port connects external buzzers for flight status alerts.
  • Micro USB port facilitates firmware updates and parameter adjustments via PC.
  • Integrated 5V and 10V BECs, each outputting 2A, provide power to receivers, VTX, LED lights, and other devices.

Specifications:

• XRotor Micro 65A 4-in-1 ESC:

  • Continuous Current: 65A x 4
  • Burst Current: 80A x 4
  • Input Voltage: 3S-6S LiPo
  • BEC Output: 5V @ 0.6A
  • Dimensions: 52x42x6.6mm
  • Mounting Holes: 30.5×30.5mm
  • Supported Firmware: BLHeli_32
  • Weight: 15g
  • Application: Suitable for FPV drones with a 130-280mm diagonal wheelbase

• F7 Convertible Flight Controller:

  • Dimensions: 32x32mm
  • Weight: 3.3g
  • Programming Interface: Betaflight/Cleanflight-configurator
  • LED Control: 5V @ 1.5A / 10V @ 1.5A

This combination delivers a robust and efficient power system, ensuring your FPV racing drone operates at peak performance.